Your hoodie comes out of the wash with the side seams crawling toward the front. It's not the wash, and it's not your customer — it's spirality, and it was engineered in before the garment was ever worn.
Spirality is stored torque in knitted fabric releasing in the wash. This guide covers the three causes, how to spot it early, and how a factory engineers it out — so the first person to discover it isn't the one who paid for the garment.
The side seams migrate. Instead of running straight down the side of the body where they were sewn, they crawl toward the front (or the back) after washing. Hems skew with them, and anything printed or embroidered on the chest ends up sitting visibly off-centre — on a garment that left the factory looking straight.
The check is simple: wash the garment, lay it flat, and compare the seam position against the spec. If the seams have travelled in one wash, the torque is in the panels, and every garment cut from the same cloth will do the same. It is not a one-off defect. It is a property of the run.
| Cause | What happens | How it's prevented |
|---|---|---|
| Off-grain cutting | Panels skewed a few degrees to save cloth; seams migrate after washing | Grain line checked on every marker before a panel is cut |
| Live yarn torque | Low-twist yarn keeps trying to untwist, dragging the garment around | Fabric selection and finishing that relax the torque before cutting |
| Skipped relaxation | Fabric cut straight off the roll carries its rolling tension into the garment | 24–48 hours of rest, compaction, and a spirality test on the sample |
Knitted fabric has a grain — the direction its loops run. Panels are supposed to be cut true to it. But laying panels a few degrees off the grain can squeeze more pieces out of the same cloth, and that saving is tempting on a tight quote. Every skewed panel stores torque along its seams, and the wash releases it. The garment twists because, in a real sense, it was cut twisted.
Yarn is made by twisting fibres together, and yarn with too little twist — or twist that was never properly set — keeps trying to untwist itself. Knit that yarn into fabric and the whole cloth carries a slow rotational urge. Sewing holds it in place while the garment is dry and new. Washing relaxes the fibres, the torque wins, and the garment rotates around the body.
Fabric comes off the roll carrying the tension of being rolled. Cut it immediately and that tension is sewn into the garment, waiting. Rested, compacted fabric has already given up its rolling tension before a blade touches it — fabric cut straight off the roll gives it up later, in your customer's wash, taking the seams with it.

None of the three causes is mysterious, and none of them is fixed at the sewing stage. They are prevented by process, in order:
Another defect that starts earlier than you think →
The honest part: it can't be sewn out after the fact. The twist is cut into the panels before sewing, and no pressing, washing programme or re-sewing removes torque that lives in the cloth itself. Anyone who offers to "fix" finished twisted stock is selling you a pressing bill.
What you can do is feed it into the next run's spec: grain-true cutting written into the order, rested and compacted fabric, and a spirality check on the pre-production sample as an approval condition. The defect you have already paid for once is the cheapest specification lesson in manufacturing — as long as you only pay for it once.
Get a costing for your style →
Why does my hoodie twist after washing? Spirality. Torque stored in the fabric — from off-grain cutting, lively yarn or unrelaxed cloth — releases in the wash and drags the seams around with it.
Can a twisted hoodie be fixed? No. The twist is cut into the panels before sewing; no pressing, washing or re-sewing removes it. Prevention at cutting is the only fix.
Is spirality a fabric problem or a sewing problem? It starts in the yarn and fabric, and it is locked in at cutting. Good sewing cannot remove torque that was cut into the panels.
How is spirality tested? Wash the sample garment and measure the seam skew against the agreed spec, before bulk is approved. If it moves in the sample, it moves in the run.
Does it happen to t-shirts too? Yes — any knitted garment can carry it, and lighter jerseys show it readily. Hoodies just make it obvious because the seams and prints are so visible.
How do I stop it on my next run? Spec grain-true cutting, rested and compacted fabric, and a spirality check on the pre-production sample. All three are in our process before bulk starts.
Send the product, quantity and fabric you're planning — we'll cost the actual style, 100 per style, sample first.